Atomic Mail Sender 5.15 Full Crack Softwarel

Atomic Mail Sender 5.15 Full Crack Softwarel

Click Here ->>> https://blltly.com/2tquCt

Jumping to AARCH64 kernel via monitor[ 0.000000] Booting Linux on physical CPU 0x0[ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Initializing cgroup subsys cpuacct[ 0.000000] Linux version 4.4.60 (root@CNXMDNIOUB01) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 RAX120-V1.0.1.116+r49254) ) #1 SMP PREEMPT Thu Jun 18 19:52:00 CST 2020[ 0.000000] Boot CPU: AArch64 Processor [410fd034][ 0.000000] Ignoring memory range 0x40000000 - 0x41000000[ 0.000000] efi: Getting EFI parameters from FDT:[ 0.000000] efi: UEFI not found.[ 0.000000] psci: probing for conduit method from DT.[ 0.000000] psci: PSCIv1.0 detected in firmware.[ 0.000000] psci: Using standard PSCI v0.2 function IDs[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.[ 0.000000] PERCPU: Embedded 15 pages/cpu @ffffffc03ef4f000 s21248 r8192 d32000 u61440[ 0.000000] Detected VIPT I-cache on CPU0[ 0.000000] CPU features: enabling workaround for ARM erratum 845719[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 229288[ 0.000000] Kernel command line: console=ttyMSM0,115200n8 swiotlb=1[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)[ 0.000000] software IO TLB [mem 0x7fe07000-0x7fe47000] (0MB) mapped at [ffffffc03ee07000-ffffffc03ee46fff][ 0.000000] Memory: 902096K/931712K available (6582K kernel code, 696K rwdata, 2700K rodata, 248K init, 330K bss, 29616K reserved, 0K cma-reserved)[ 0.000000] Virtual kernel memory layout:[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)[ 0.000000] 0xffffffbdc0040000 - 0xffffffbdc1000000 ( 15 MB actual)[ 0.000000] fixed : 0xffffffbffa7fd000 - 0xffffffbffac00000 ( 4108 KB)[ 0.000000] PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000 ( 16 MB)[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03f000000 ( 1008 MB)[ 0.000000] .init : 0xffffffc000993000 - 0xffffffc0009d1000 ( 248 KB)[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000992ab4 ( 9291 KB)[ 0.000000] .data : 0xffffffc0009e0000 - 0xffffffc000a8e200 ( 697 KB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1[ 0.000000] Preemptible hierarchical RCU implementation.[ 0.000000] Build-time adjustment of leaf fanout to 64.[ 0.000000] NR_IRQS:64 nr_irqs:64 0[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns[ 0.000237] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)[ 0.000244] pid_max: default: 32768 minimum: 301[ 0.000301] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)[ 0.000306] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)[ 0.000645] Initializing cgroup subsys io[ 0.000657] Initializing cgroup subsys devices[ 0.000664] Initializing cgroup subsys freezer[ 0.000671] Initializing cgroup subsys net_cls[ 0.000676] Initializing cgroup subsys pids[ 0.000845] EFI services will not be available.[ 0.000861] ASID allocator initialised with 65536 entries[ 0.051368] MSM Memory Dump base table set up[ 0.051384] MSM Memory Dump apps data table set up[ 0.090106] Detected VIPT I-cache on CPU1[ 0.090136] CPU1: Booted secondary processor [410fd034][ 0.120083] Detected VIPT I-cache on CPU2[ 0.120097] CPU2: Booted secondary processor [410fd034][ 0.150096] Detected VIPT I-cache on CPU3[ 0.150109] CPU3: Booted secondary processor [410fd034][ 0.150136] Brought up 4 CPUs[ 0.150150] SMP: Total of 4 processors activated.[ 0.150156] CPU: All CPU(s) started at EL1[ 0.150171] alternatives: patching kernel code[ 0.159007] DMI not present or invalid.[ 0.159154] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns[ 0.159169] futex hash table entries: 1024 (order: 5, 131072 bytes)[ 0.159394] pinctrl core: initialized pinctrl subsystem[ 0.159926] NET: Registered protocol family 16[ 0.160033] ramoops: using module parameters[ 0.160115] pstore: Registered ramoops as persistent store backend[ 0.160121] ramoops: attached 0x20000@0x50b00000, ecc: 0/0[ 0.190026] cpuidle: using governor ladder[ 0.220034] cpuidle: using governor menu[ 0.220102] vdso: 2 pages (1 code @ ffffffc0009e5000, 1 data @ ffffffc0009e4000)[ 0.220119] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.[ 0.220195] DMA: preallocated 256 KiB pool for atomic allocations[ 0.220251] CPU: IPQ8074, SoC Version: 1.2[ 0.220271] glink_init: IPC Logging Disabled[ 0.220455] IPC logging disabled[ 0.220458] IPC logging disabled[ 0.220460] IPC logging disabled[ 0.220463] IPC logging disabled[ 0.220465] IPC logging disabled[ 0.227967] irq: no irq domain found for /soc/smp2p-wcss/slave-kernel ![ 0.230271] glink_core_register_transport: IPC Logging disabled[ 0.230307] glink_core_link_up glink is up[ 0.230933] sps:sps is ready.[ 0.261270] dmi: Firmware registration failed.[ 0.262048] Advanced Linux Sound Architecture Driver Initialized.[ 0.262419] clocksource: Switched to clocksource arch_sys_counter[ 0.262594] FS-Cache: Loaded[ 0.264171] NET: Registered protocol family 2[ 0.264238] create ipmac proc[ 0.264576] TCP established hash table entries: 8192 (order: 4, 65536 bytes)[ 0.264630] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)[ 0.264724] TCP: Hash tables configured (established 8192 bind 8192)[ 0.264763] UDP hash table entries: 512 (order: 2, 16384 bytes)[ 0.264781] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)[ 0.264889] NET: Registered protocol family 1[ 0.265027] RPC: Registered named UNIX socket transport module.[ 0.265031] RPC: Registered udp transport module.[ 0.265034] RPC: Registered tcp transport module.[ 0.265037] RPC: Registered tcp NFSv4.1 backchannel transport module.[ 0.265549] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available[ 0.270605] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.271445] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).[ 0.271820] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.[ 0.272102] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.[ 0.272165] fuse init (API version 7.23)[ 0.272347] SGI XFS with ACLs, security attributes, realtime, no debug enabled[ 0.274690] Key type asymmetric registered[ 0.274700] Asymmetric key parser 'x509' registered[ 0.274720] io scheduler noop registered[ 0.274727] io scheduler deadline registered (default)[ 0.275769] Turn Off All LED[ 0.276190] 20000000.pci supply vdda not found, using dummy regulator[ 0.276226] 20000000.pci supply vdda_phy not found, using dummy regulator[ 0.276250] 20000000.pci supply vdda_refclk not found, using dummy regulator[ 0.276430] PCI host bridge /soc/pci@20000000 ranges:[ 0.276447] IO 0x20200000..0x202fffff -> 0x20200000[ 0.276456] MEM 0x20300000..0x20ffffff -> 0x20300000[ 1.302444] qcom-pcie 20000000.pci: phy link never came up[ 1.303971] qcom-pcie 20000000.pci: hostinit failed[ 1.303976] qcom-pcie 20000000.pci: cannot initialize host[ 1.304077] qcom-pcie: probe of 20000000.pci failed with error -110[ 1.304212] 10000000.pci supply vdda not found, using dummy regulator[ 1.304238] 10000000.pci supply vdda_phy not found, using dummy regulator[ 1.304257] 10000000.pci supply vdda_refclk not found, using dummy regulator[ 1.304429] PCI host bridge /soc/pci@10000000 ranges:[ 1.304443] IO 0x10200000..0x102fffff -> 0x10200000[ 1.304450] MEM 0x10300000..0x10ffffff -> 0x10300000[ 2.339420] qcom-pcie 10000000.pci: phy link never came up[ 2.340943] qcom-pcie 10000000.pci: hostinit failed[ 2.340948] qcom-pcie 10000000.pci: cannot initialize host[ 2.341009] qcom-pcie: probe of 10000000.pci failed with error -110[ 2.341267] MDSS QPIC HW Base phy_Address=0x7980000 virt=0x4c0000[ 2.341489] mdss_qpic_panel_probe: Panel Name = qpic lcd panel[ 2.342329] mdss_fb_register: FrameBuffer[0] 800x480 registered successfully![ 2.345036] NET: Registered protocol family 27[ 2.345045] IPC_RTR: ipc_router_create_log_ctx: IPC Logging disabled[ 2.345053] qmi_log_init: IPC Logging disabled[ 2.345056] qmi_log_init: IPC Logging disabled[ 2.345105] msm_rpm_log_probe: OK[ 2.345635] TZ Log : Will warn on Access Violation, as paniconaccessviolation is not set[ 2.346033] msm_serial 78b3000.serial: msm_serial: detected port #0[ 2.346057] msm_serial 78b3000.serial: uartclk = 3686400[ 2.346085] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 77, base_baud = 230400) is a MSM[ 2.346102] msm_serial: console setup on port #0[ 3.182703] console [ttyMSM0] enabled[ 3.187553] msm_serial 78b1000.serial: msm_serial: detected port #1[ 3.190956] msm_serial 78b1000.serial: uartclk = 19200000[ 3.197038] 78b1000.serial: ttyMSM1 at MMIO 0x78b1000 (irq = 78, base_baud = 1200000) is a MSM[ 3.202765] msm_serial: driver initialized[ 3.211247] msm_serial_hsl_init: driver initialized[ 3.219978] brd: module loaded[ 3.222288] loop: module loaded[ 3.223436] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64[ 4.222425] m25p80 spi32766.0: SPI transfer failed: -110[ 4.222449] spi_master spi32766: failed to transfer one message from queue[ 4.226794] m25p80 spi32766.0: error -110 reading 9f[ 4.233490] m25p80: probe of spi32766.0 failed with error -110[ 4.239333] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xac[ 4.244249] nand: Winbond W29N04GZ[ 4.250744] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64[ 4.254033] 33 ofpart partitions found on MTD device qcom_nand.0[ 4.261513] Creating 33 MTD partitions on \"qcom_nand.0\":[ 4.267686] 0x000000000000-0x000000100000 : \"0:SBL1\"[ 4.274080] 0x000000100000-0x000000200000 :